LDF PLUMBING & HEATING | HOT WATER CYLINDERS

No hot water? Hot water cylinder not working? Interested in an Unvented Hot Water System or need your annual service to protect the warranty?

LDF Hot Water Cylinder Services

Service

Installation

Supply

Replace

System re-design

System upgrade

G3 Registered

We supply, install and service the two main types of Hot Water Cylinder. Vented and Unvented. Specialising in the brands - Megaflo, Gledhill and OSO.

These services, combined with LDF's 15+ yrs experience, will ensure you have all the warmth and hot water you need in your home.

If you have any questions, are unsure what you need or know exactly what you need, get in touch now for an initial no-obligation chat or initial site visit.

GET IN TOUCH

Unvented Hot Water Cylinder

Unvented hot water cylinders have soared in popularity and can now be found in most homes across the UK. Connected directly to your mains water system, unvented cylinders ensure copious amounts of stored hot water is available on demand and they operate at mains pressure to offer much higher flow rates. This allows you to enjoy improved shower and bath performance all year round! Whilst more space is needed than a Combi boiler they are more efficient and therefore cost effective.

Has your cylinder been serviced in the last 12 months?

The industry standard for servicing an Unvented hot water cylinder is every 12 months by a G3 registered engineer. Unlike more conventional boilers, there is a greater service need as the water is stored in a sealed, pressurised vessel at high temperatures. A regular service will protect your manufactures warranty, maintain efficient performance, and reduce the risk of a potentially costly breakdown and collateral damage to your property.

To book a qualified LDF G3 registered Unvented Cylinder specialist, please complete our contact form today or call us on 01243 256685.

Included in your service

Inspect the hot water system has been installed in compliance with Building Regulations

Check the flow rates (hot & cold)

Check the temperature of the hot water

Inspect joints to the cylinder for leaks

Check for the correct operation of safety relief valves

A thermostat check and set

Clean the inline filter within the inlet control set

Check the pressure charge on the expansion vessel and recharge if required

Update your Service Record

Three key reasons why LDF would recommend an Unvented Boiler System.

1. Unvented hot water cylinders are a great space-saving option as they use a mains supply and don't require a feeder tank in the loft. By not needing a feeder tank, you can have the cylinder installed anywhere within the property.

2. An Unvented system will supply your home with stronger water pressure than older, more conventional boilers and vented systems, assuming you have good water pressure at the mains. Stronger water pressure is essential for homes or properties with simultaneous demands for hot water.

3. Unvented systems are more energy-efficient and low-maintenance than conventional systems due to the removal of a cold water tank and the use of an immersion heater or heating element.

Interested in exploring an Unvented Hot Water system to heat your home? If so get in touch today for a free no obligtion chat and preliminary estimate.

GET IN TOUCH

Vented Hot Water Cylinder

Vented cylinders are generally found in more traditional properties. They are also known as gravity-fed hot water systems, as they rely on gravity and the height of the cold water tank to dictate the pressure. The greater the height, the more powerful the water pressure.

Unlike an Unvented system, getting your cylinder serviced annually is optional. However, a service every 12 months is still generally recommended as it will ensure your heating system is as energy-efficient as possible.

To book a qualified LDF G3 registered Vented Cylinder specialist, please click the 'Book Now' button below and complete the contact form. Alternatively, call us on 01243 256685.